Cool Cars: NEW PRODUCTS!

CCE HYDRAULIC SUSPENSION; NEW PRODUCTS!

(800.000)
**NEW** PUMP
Designed for show cars in mind, this pump features two specially machined blocks that allow for remote mounting of plumbing and dumps, or you may also mount the plumbing and dumps to the blocks. The center block contains the fill port for the tanks, and return from both pumps. The motors shown in the photo feature our new bullet end caps, but can be used with any of our CCE end caps. The tanks come in raw steel, and the rest of the components are machined aluminum.

Also available in a 2 *NEW* Pump Kit (part #: 102.800)

Call for Info and/or Pricing

(850.032)
TURBINE MOTOR END CAP
Your Price:$69.95ea.

(850.031)
BULLET MOTOR END CAP
Your Price:$69.95ea.

(620.100)
AIR CRAFT 3/8 SLOWDOWN VALVE
Your Price:$79.95ea.

(500.812)
**NEW** INDUSTRIAL SERIES BATTERY CHARGER
Eight independent 12 amp fast charger, 8 amp medium charge 2 amp trickle charge fully automatic Microprocessor Controlled Outlets.

1. Eight Individual Battery status Meters
2. Eight detachable 6ft. cords with 75 amps color coded clamps
3. Patent Pending "Thermal Runaway" protection
4. Separate standard & gel setting to assure complete charge
5. Fan Cooled for dependability and peak performance
6. Heavy Duty steel case for durability
7. Charges 12 volt batteries
Your Price:$899.95ea.

1) 4 HOLE SWITCH PANEL (top pic)
2) 4 HOLE PRE-WIRED SWITCH PANEL (bottom pic)

(930.004)
4 HOLE SWITCH PANEL FOR AIR OR HYDRAULICS
For those of you that want to hard mount your switches and are tired of your box rolling around, we now offer a switch plate for 4 switches to be hard mounted! This helps elimnate your box from tipping over and hitting a switch for you, also can clean up some space if needed.
Your Price:$14.95ea.

(920.010)
4 HOLE PRE-WIRED SWITCH PANEL FOR HYDRAULICS
Includes 2- 3 Prong, 2- 6 Prong & 13' 9 Wire Switch Cord
Your Price:$79.95ea.

Quantity:

4 HOLE SWITCH PANEL (COLOR DIPPED)
Color dipped available in:
(930.WG4) Wood Grain
(930.BW4) Burl Wood
(930.BJ4) Benjamin
(930.CF4) Carbon Fiber
Your Price:$29.95ea.

(820.200)
**NEW** CCE HD MOTORS
The difference between our
competition motors and our hd motors are the following:

1. Longer overall length which results in higher torque because of more rotating mass.
2. Additional Ground Terminal
3. Heavily reinforced and insulated armature with heavy duty windings.
4. Tru 4-field configuration for increased rpm.
Your Price:$169.95ea.
Now in Stock!

EXTREME CYLINDERS
Available in 1/2" & 3/4" Ports
This high volume cylinder will be available in 8". The extreme has a 2" outer diameter and comes with a 1/2" or 3/4" top port. This cylinder has a 1 1/4" rod for added strength vs our regular super stroker with a 1 1/8" rod.
Note: A high volume cylinders creates twice the force with the same amount of pressure. For Special Size, please call us for pricing.

TELE-SCOPIC CYLINDERS
Available from 16" to 28", 3/8" side port cylinders.
The advantage of the telescopic cylinders is you get more lift over all out of shorter cylinder cylinder housing. For example: a 28" telescopic cylinder is only 18" long completely collpase, this will allow cars with a big lock up to keep speakers in the rear decks and also keep a big lock up and also keep the bed covers.

Quantity: Pair

EXTREME CUPS
We informed you about our new Extreme & Telescopic Cylinders as you already know this 2 NEW STYLES of cylinder overall diameter are BIGGER. Therefore, now we would like to introduce you 4 NEW PRODUCTS to our CCE Hydraulics line... "THE EXTREME CUPS".

- DEEP Cups for the Extreme/Telescopics
- TOP Coil-over Cups (uses the same 710.190)
- BOTTOM Coil-over Cups for the Extreme/Telescopics
- EXTENDED BOTTOM Coil-over Cups for the Extreme/Telescopics
- DONUTS for the Extreme/Telescopics

Picture shown from left to right are as followed:
BOTTOM Coil-over Cups, TOP Coil-over Cups
& DEEP Cups for the Extreme/Telescopic Cylinders.

(CLICK HERE FOR PRICING!)

New Features:
- Tig Welded Top Design -
- Longer Piston For More Stability -
- Poly-pak Seal Design -
- Bronze Bushings -

COMPETITION CYLINDERS
Available in sizes from 4" to 12", 3/8" or 1/2" Port
The cylinders feature a 1" steel shaft, single poly-pak with a o-ring back up on a billet piston and bronze guide bushing.
Cylinder Bushing: (As of September 08: Effective Immediately!)
**Mainly for our newly designed cylinders - we no longer offer for our old cylinders.**

COMPETITION CYLINDERS:
Available in 3/8" or 1/2" Port

Quantity: Pair

(ATA-UPPR/ATA-LOWR)
ADJUSTABLE TRAILING ARMS
(Regal, Cutlass, Monte Carlo & Cadillac)

NEW REINFORCED!
(RTA-SWIV)
HYDRAULIC TRAILING ARMS
WITH SWIVEL CUP
These have polyurethane bushings, and a newly designed swivel cup to maintain cylinder articulation. They are made of 2" x 3" 1/4" wall tube. These are heavy duty, and they allow the back to sit a bit lower that with the stock arms with a swivel cup on top.

Angle View 2: shows the kick up, like the factory arms. This allows you to sit that much lower and helps with swivel cup articulation.

Your Price: $449.00pr.

NEW READY TO WELD!
(SWIV-MOU)
SWIVEL CUP WITH MOUNT
They are very easy to install and provide a strong base for the swivel cup to be mounted. We are also working on some other mounting options, which will be available soon. These will fit "G-Body" axle tubes in place of the factory spring mount.
Your Price: $119.95pr.

CCE HYDRAULIC ACCESSORIES; NEW PRODUCTS!

	CCE HYDRAULICS MINI PUMP KEYCHAIN Colors available in Blue, Silver & Purple While Supplies Last! Quantity:
	COOL CARS WHITE CITYSCAPE T-SHIRTS Available in Sizes: Kids for $19.95ea. Adult: Small, Medium, Large, X-Large, 2X-Large, 3X-Large, 4X-Large for $19.95ea. While Supplies Last! Quantity:
	CCE HYDRAULICS BLACK IMPALA T-SHIRTS Available in Sizes: Kids for $19.95ea. Adult: Small, Medium, Large, X-Large, 2X-Large, 3X-Large, 4X-Large for $19.95ea. While Supplies Last! Quantity:
	COOL CARS BLACK LOWDOWN T-SHIRTS Available in Medium, Large & X-Large Your Price:$10.00ea. Quantity:

AIR BAG SUSPENSION; NEW PRODUCTS!

52-444C
VIAIR 444C DUAL PACK

• 12-Volt
• Duty Cycle: 100% @ 100 PSI
• Duty Cycle: 50% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Max Amp Draw: 38 Amps
• Dimensions (each): 11.25 ” L x 4.00” W x 6.75 ” H
• Net Weight (each): 19.5 lbs.
Your Price: $319.95

NEW TUBULAR!
AIR RIDE TRAILING ARMS
W/ AIR BAG MOUNT
(59-64 Impala's)

Your Price: $299.00pr.

AK-4000
AIR CHECK VALVES
Available in 3/8" or 1/2"
Your Price: $19.95ea.