This is
a one pump, one dump, one switch, rear only kit. This kit uses our
fuerte pump (#13 Marzocchi pumphead, 1" ported block, competition
motor) and fuerte single dump assembly (1" fittings and check
valve) for the best possible performance. The kit is designed to
be installed on vehicles equipped with coil spring rear suspension
but can be easily adapted using the options and upgardes listed
below.
Optional parts for Coil Spring Suspension:
800.402 - Upgrade to
Coil-over Set-up
700.025 - 2 Ton Pre-cut Springs
also see Cylinder Upgrades
For Installation in leaf spring equipped
vehicles with reverse offset wheels)
710.730 - Mini-coil over cups
700.034 - 3/4 ton Mini-coils
with standard offset wheels same as coil spring set-up
For Installation on Vehicles with Strut Suspension.
700.034 - 3/4 Ton Mini-Coils
NOTE: If you are unsure what type of suspension
your vehicle has feel free to call our tech support line at 502.969.7600 and we can tell you exactly what you need. |
