This is
a 3 pump, 4 dump setup using our fatboy pumps. This setup uses our
fatboy dump assemblies which utilize all 1/2 plumbing. The 3 pump
configuration allows you to run 2 pumps to the rear for power 3
wheel or 2 "to the nose" for serious hopping power. The
kit comes complete (excluding coil springs and batteries) with suspension
components for standard coil spring equipped vehicles but can easily
be adapted to your needs (or vehicle) by using the upgrades and
options listed below.
Upgrades for coil spring cars:
800.402 - Upgrade to Coil-over
rear
800.175 - Upgrade from 1pr. Reg. to Deep Cups
700.025 - 2 Ton Pre-cut Springs
For Installation on an Import/Mini Truck:
(with reversed offset wheels)
700.034 - 3/4 Ton Mini-Coils (2 pairs)
710.730 - Mini Coil-over Cups
(2pairs)
also see Cylinder Upgrades
For Installation on an Import/Mini Truck:
(with standard offset wheels)
800.402 - Upgrade rear cups to coil-over
rear set-up
700.025 - 3/4 Ton Mini-coils
710.730 - Mini-Coil Over Cups
also see Cylinder Upgrades
For Installation on strut equipped vehicles:
700.034 - 3/4 Ton Mini-coils
NOTE:
If you are unsure what type of suspension your vehicle has feel
free to email us and we can tell you exactly what you need. |