Just picked up from the Dealership with only 20 miles. (Click
picture for Larger View)
Stock Interior:
This is the stock GM Interior before our Stereo Installer
got his hands on it. (Click picture for
Larger View)
Beginning of Tear Down:
Cool Cars Crew did not waste anytime taking this brand NEW
Truck apart. (Click picture for Larger
View)
Beginning of Suspension:
Stock Front End before anything was cut.
(Click picture for Larger View)
The Front
Frame Clip was Z'd 3 1/2" in:
This moves the suspension up and allow for a stock floor
body drop. (Click picture for Larger
View)
Front Suspension Done:
DJM 2" drop a-arms were installed to get the maximum
drop from the front end. 2500lb Firestone bags were installed in NEW custom
frame pockets. (Click picture for Larger View)
Moved Trans Tunnel Up 2":
The transmition tunnel was moved up 2" to
allow for proper clearance. This was the only part of the floor that was
moved. (Click picture for Larger View)
Suspension:
The factory frame was cut off right at the back
of the cab. Cool Cars Crew designed a unique tubular frame that ran under
the rear axle.
3- 3 gallon tanks plumbed into frame once the framing was complete, the
cool cars crew then incorporated 3- 3 gallon firestone air tank into the
design of the frame. (Click picture
for Larger View)
After the tank were in place the bag mount were fabricated and put in place
to start the design of our custom cantalever rear suspension. (Click
picture for Larger View)
Completed:
This is a final picture of the NEW tubular rear frame with
the air tanks and cantalever in place. And yes, the air does go through
the frame rails. (Click picture for Larger View)
Roof-Off & Door Shaved:
After many disagreement and long arguments about how we were
going to cut the roof, the Cool Cars crew final designed on one style that
appealed to everyone (ROADSTER). (Click
picture for Larger View)
This side view shows the body fabrication done on the truck riding her of
the big bulky door handle to new shave sleek look. (Click
picture for Larger View)