|
CCE
HYDRAULIC PUMPS
Note: All Prices are subject to change without notice.
|
| |
|
Click for Larger Image!
|
(800.100) Chrome Street Pump
The Street Edition
pump is one of our most popular products. For show quality looks the aluminum
block features rounded corners and the CCE logo engraved into it. To further
the show appearance of the pump, both the motor and the tank are chrome
on these pumps. For reliability and performance, the street edition pump
is equipped with a genuine Marzocchi pumphead and a CCE competition motor
with vented bearing endcaps. If your building a street or show car, this
is an excellent pump for you.
Your
Price: $239.95ea.
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image!
|
**NEW
& IMPROVE**
(800.200) Chrome Competition Pump w/ Steel Inserts
The CCE Competition
pump is a good alternative for those who want more power and performance
than a street pump but do not want the extreme power of some of our larger
pumps. The competition pump comes standard with many performance enhancing
features such as, air input ports machined into the aluminum block, a billet
aluminum and a competition motor equipped with a vented bearing endcap.
To keep a show quality appearance, the pump has rounded corners on the aluminum
block as well as chrome motor and tank. (NOW COMES WITH STEEL INSERTS!)
Your
Price: $299.95ea.
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image!
|
(800.300) Chrome Cyclone Pump
The
cyclone is another unique design. It uses a standard thickness, block with
three ports machined into it. There is a 3/8 pressure port on each side
of the block the oil level to prevent the oil level to prevent foaming.
This configuration allows you to plumb your set-up in serveral unique ways.
For good looks and performance, this pump comes standard with chrome tanks,
a billet backing plate and a chrome competition motor with a bearing end
cap. Like all of our pumps, the cyclone comes with a genuine Marzocchi pumphead. (Dump Assembly shown with our pumps is not included!)
Your
Price: $279.95ea.
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image!
|
(800.400) Chrome Turbine Pump
The
turbine pump is yet another unique from CCE Hydraulics. This pump is machined
with 2 pressure ports and 2 return ports, all mounted on backing plate,
chrome tank and a chrome motor for show quality looks. Like all of our pumps,
the turbine is equipped with a vented bearing end caps and genuine Marzocchi
pumphead. (Dump Assembly shown with our pumps
is not included!)
Your
Price: $279.95ea.
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image!
|
(800.500) Chrome Fatboy Pump
The
fatboy pump is a unique design only available from CCE hydraulics. The 3"
aluminum block not only provides a unique appearance but is also machined
with a high pressure 1/2 port in the top and a return port in the side below
the oil level to prevent foaming. Like all of our pumps, the fatboy is equipped
with a genuine Marzocchi pumphead. To also give a show quality worthy appearance,
the block is engraved with the CCE logo and euipped with a billet backing
plate (which also serves as extra support for the tank). Chrome tanks and
motors with bearing end caps complete the look of this pump.
Your
Price: $329.95ea.
FREE SHIPPING!
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image!
|
(800.600) Chrome Fuerte Pump
The fuerte pump is our newest, most powerful, extreme pump.
The most remarkable feature on this pump is the 1" pressure port.
To compliment this high flow block design, the kit comes standard with
a #13 Marzocchi pumphead. The aluminum block was also designed with a
3/8 return port located on the side of the block below the level of the
oil to prevent foaming. We also designed a solid billet backing plate
to provide better support to the pump during operation. To make the pump
look as good as it performs, it comes standard with chrome tanks and motors.
This is an excellent pump to use in a hopper whether it's on the street
or in full competition.
Your
Price: $349.95ea.
FREE SHIPPING!
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
Click for Larger Image! |
(800.700) Piston Pump (Chrome Motor, Metal Tank)
This tank is made from honed DOM tube, and has 5/16" rods. The piston is machined with a deep dish for a larger volume of air or nitrogen. It also comes with a pressure gauge and air system. This is a must for anyone who is looking for more out of their system. It will enhance the performance of the pump, also ease the strain on the pumphead and motor. Injecting air or nitrogen into a pump increases the response but often results in foaming the oil. Foam will eventually lead to a pressure drop. By seperating the oil from the air with the piston, greatly decrease's the chance of foam in the system, also increasing the amount of force on the oil. This will help the pump breathe better, like a supercharger on a engine.
Your
Price: $525.00ea.
FREE SHIPPING!
Notice: HD Motors - Back order
at the moment, check back with us! |
|
|
|
|
Whammy Pump
Available in Chrome Motor & Metal Tank
Notice: HD Motors - Back order at the moment, check back with us!
|
|
|
