- Hydraulic Kits
- Hydraulic Kit Upgrades
- Piston Pump Kits
- CCE Pumps
- Spline Keys
- CCE Motors
- Marzocchi Pumpheads
- Pumpheads & Components
- Pump Components
- CCE Pump Accessories
- Tanks
- Cylinders
- Cylinder Components
- Dumps and Components
- Adex Dumps
- Parker Hoses


- Check Valves
- Slowdown Valves
- Coil Springs
- Cups & Suspension
- Accumulator and Fittings
- Electrical Components
- Switches & Switch Cord
- Switch Extensions
- Prewired & Empty Switch Boxes
- Fittings
- Y Blocks
- Specialty Parts
- Trailing Arms
- Chain Steering Wheel
- CCE Hydraulic Apparel
- Reinforced Parts

                   "MANUFACTURING CENTER"  

Note: All Prices are subject to change without notice.
- Tig Welded Top Design -
- Longer Piston For More Stability -
- Poly-pak Seal Design -
- Bronze Bushings -
Available in sizes from 4" to 12", 3/8" or 1/2" Port
This cylinder has 2 major seals on the piston head. First is the poly-pak seal then a o-ring with teflon backup seal.
Cylinder Bushing: (As of September 08: Effective Immediately!)
**Mainly for our newly designed cylinders - we no longer offer for our old cylinders.**
COMPETITION CYLINDERS:
Available in 3/8" or 1/2" Port

Quantity:  Pair


 

Note: All Prices are subject to change without notice.

Available in sizes from 8" to 16", 3/8" or 1/2" Port. These are the best cylinders available. They feature an oversized 1 1/8" shaft which makes the cylinder 40% stronger than the competition cylinder (machined at the bottom to use standard cups.) What makes this cylinder different is not only the largest shaft but it's unique seal design. This cylinder has 2 major seals on the piston head. First is the poly-pak seal then a o-ring with teflon backup seal. These are the cylinders we use in our competition vehicles. Available upgrade for kits.

SUPER STROKER CYLINDERS:
Available in 3/8" or 1/2" Port

Quantity:  Pair



Note: All Prices are subject to change without notice.

Size available in 16" ONLY.
The cylinders feature a 1" steel shaft with double o-ringed billet plungers and bronze guide bushings.

CHROME CYLINDERS:

Quantity:  Pair



Note: All Prices are subject to change without notice.

Available in 1/2" & 3/4" Ports
This high volume cylinder will be available in 8". The extreme has a 2" outer diameter and comes with a 1/2" or 3/4" top port.
This cylinder has a 1 1/4" rod for added strength vs our regular super stroker with a 1 1/8" rod.
Note: A high volume cylinders creates twice the force with the same amount of pressure.
For Special Size, please call us for pricing.


Quantity:  Pair




Note: All Prices are subject to change without notice.


Available from 16" to 28", 3/8" side port cylinders.
The advantage of the telescopic cylinders is you get more lift over all out of shorter cylinder cylinder housing.
For example: a 28" telescopic cylinder is only 18" long completely collpase, this will allow cars with a big lock up to keep speakers in the rear decks and also keep a big lock up and also keep the bed covers.



Quantity:  Pair